How-To: Make a homemade Fender Elim Kit (home depot)

I made one for my friend's gixxer. it worked well.

Part: Simpson Strong-Tie AC4Z (home depot) total cost: 2bucks

make a few holes and you're golden... cost=a couple of bucks from home depot and a beer

i was going to do a how... but got lazy..... here are some pics to reference:

the fence post (2 are shown)


holes that you want to make (this includes the optional light/hood)


final product:







(all the pics are not mine.. i found them somewhere on the interwebs)

I'll do a write up if I have time.. but this is extremely cost effective when wanting to get rid of the rudder

starship enterprise.. well there really isn't much to write up. you just need to dremel holes for signal lights and to route lines.

Looking at the pics, it is pretty self-explanatory. Just post up if you have questions

i just took a hacksaw and cut the bottom part of my fender below the license plate off. it looks a lot better, its free and its easy

edit: thats on my r6s...i just realized that option isnt possible on the 06+ models